SIZING & MEASUREMENT:
|
|
SMALL |
MEDIUM |
LARGE |
|
Waist |
10-19" |
14-21" |
15-24" |
|
Thighs |
8-13" |
10-15" |
10-17" |
|
Rise |
14.5" |
16" |
18" |
|
Weight Estimate |
8-16 lb. |
12-25 lb. |
22-40 lb. |
A unique all-in-one diaper design that combines the convenience of an all-in-one diaper while providing the absorbency adjustability of a pocket diaper.
Made with a waterproof outer layer of PUL, 3 sewn in layers of high quality microfiber terry, a layer of microfleece, and a full layer of cotton velour next to baby’s skin.
Microfiber terry is used as the soaker pad for its ability to absorb wetness fast. A layer of microfleece is used to provide a dry barrier between the velour top layer and the soaker pad. Organic cotton velour is used as the top layer of the diaper for its non-allergenic properties. Natural cotton is one of the least allergenic materials known to man. It is also one of the most moisture absorbent materials there is.
The result is a diaper that quickly absorbs moisture and wicks it from the baby’s body to hold it away in the microfiber terry soaker layers. The fact that microfleece or suedecloth is not directly in contact with the baby’s skin enables those who are sensitive to those materials to use this diaper and still get the stay dry effect. And because of the cotton’s inherent absorbent qualities, should the microfleece layer ever experience buildup, liquid will be absorbed first by the cotton velour layer instead of just rolling off the sides and immediately causing leaks.
In cases where additional absorbency is needed, a doubler or insert may be added through the opening at the back of the diaper.
TIPS ON USING:
1. The diapers need to be pre-washed at least once before use. Three to four times, and dried in between, is preferable. This causes the cotton fibers of the top layer to fluff up and become more absorbent. You may experience leaking if the diaper has not been pre-washed sufficiently.
2. Hemp inserts/doublers perform best when additional absorbency is needed. |
